Preparation of magnetic zeolite/chitosan composite using silane as modifier for adsorption of Cr(VI) from aqueous solutions

This study aimed to prepare an efficient, cost-effective, and separable magnetic zeolite/chitosan composite (MZFA/CS) adsorbent from solid waste to deal with the water pollution of Cr(VI). The MZFA/CS was characterized by X-ray fluorescence (XRF), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and vibrating sample magnetometer (VSM) techniques. Then, the effect of pH, temperature, initial concentration of Cr(VI) ions, and contact time was considered in the study. For a sorbent dose of 0.1 g in 50 mL of a Cr(VI) solution, at a contact time of 30 min, temperature of 30°C, and a pH of 3, an adsorption capacity (q_e) of 16.96 mg g⁻¹ was achieved. Adsorption kinetics and isotherm data obtained for all adsorption systems were well-fitted by pseudo-second-order and Langmuir models, respectively. The thermodynamic study suggested that the adsorption process is spontaneous and endothermic in nature. In summary, the adsorbent with better separability (Ms = 16.83 emu g⁻¹) and adsorbability was successfully fabricated.     

Black phosphorous nanosheets–gold nanoparticles–cisplatin for photothermal/photodynamic treatment of oral squamous cell carcinoma

To improve five-year survival rate of oral squamous cell carcinoma (OSCC), the development of a novel composite material of black phosphorus nanosheets (BPNSs) and gold nanoparticles (AuNPs) for tumor treatment was carried out. The purpose of this study is to evaluate the cytostatic effects of BPNSs, AuNPs loaded with cisplatin (CDDP) on human tongue squamous cell carcinoma cells lines (SCC-9), and 7,12-dimethylbenz anthracene induced cheek squamous cell carcinoma was validated in golden hamsters animal models. The results showed that BPNSs could efficiently inhibit the metastasis and growth of OSCC compared with CDDP and AuNPs. And a combination composite of AuNPs–BPNSs loaded with CDDP could more effectively inhibit the metastasis and growth of OSCC, which might be due to the high drug-loading capacity, excellent photothermal properties and the combination of photodynamic and photothermal therapy of BPNSs and AuNPs, as well as the synergistic effects of AuNPs, BPNSs and CDDP.     

羧基含氟聚合物纳米纤维膜的制备及对铜(II)的吸附性能

以甲基丙烯酸十二氟庚酯(DFHMA)和甲基丙烯酸(MAA)为单体,通过溶液聚合法制备出共聚物DFHMA-co-MAA,将DFHMA-co-MAA与聚偏氟乙烯(PVDF)按一定质量共混,采用静电纺丝方法,制备出羧基含氟聚合物(PVDF-DM)纳米纤维膜,用以吸附溶液中Cu(II)。讨论了PVDF和DFHMA-co-MAA的质量配比对纤维微观形貌和对Cu(II)吸附性能的影响,得出当PVDF与DFHMA-co-MAA的质量比为1∶2时,纤维的微观直径较均一且吸附性能最佳,故实验采用该质量配比制备PVDF-DM。使用红外光谱对PVDF-DM进行表征,显示出PVDF-DM纤维膜中含有—OH和C＝O等活性吸附基团。以PVDF-DM纳米纤维膜为吸附剂,探讨了吸附剂用量、吸附pH值和吸附时间对Cu(II)吸附性能的影响,并研究了吸附过程的动力学模型。结果表明,室温下,当吸附剂用量为0.03g,pH=5时,吸附60min达到吸附平衡,吸附率和吸附量分别为94.37%和62.91mg/g,PVDF-DM纳米纤维膜对Cu(II)的吸附过程同时满足拟一级动力学和拟二级动力学模型,说明该吸附过程包含了化学吸附和物理吸附。PVDF-DM纳米纤维膜循环使用5次后,吸附能力仅降低16.23%,说明PVDF-DM纳米纤维膜具有很好的再生使用能力。     

聚乙烯亚胺氨基化磁性氧化石墨烯的制备及其对活性艳红X-3B的吸附

使用改性hummers法制备出氧化石墨烯(GO),通过水热法在GO上生长磁性CoFe₂O₄,再使用聚乙烯亚胺(PEI)进行氨基改性,制备出聚乙烯亚胺氨基化磁性氧化石墨烯(PEI-MGO)。使用X射线衍射仪(XRD)和扫描电子显微镜(SEM)对PEI-MGO的结构和微观形貌进行表征。结果表明:纳米级尖晶石相CoFe₂O₄均匀分散于GO上,且氨基改性成功。探讨了PEI-MGO对水体中活性艳红X-3B的吸附性能。结果表明:在活性艳红X-3B初始质量浓度为150mg/L、体积为100mL、吸附剂质量为0.04g、pH值为1、吸附时间为60min时达到平衡,平衡吸附量为361.15mg/g。PEI-MGO对活性艳红X-3B的饱和吸附量为470.58mg/g。磁分离和磁回收研究表明,PEI-MGO能快速从水体中分离,回收率为98.6%。     

Prediction of methane adsorption content in continental coal-bearing shale reservoir using SLD model

Shale gas, as an important unconventional resource, has drawn global attention. It is mainly composed of adsorption gas and free gas. Adsorption gas content could play an important guiding role on both the selection of favorable perspective area and the exploration and exploitation of shale gas resources. In order to accurately measure adsorption gas content, a new approach was established to predict the adsorption isotherm of methane on shale. Based on the simplified local-density (SLD) method, both the adsorption isotherms of illite, illite/smectite mixed-layer, cholorite and type III kerogen and the total shale rock could be well fitted. The fitting results show good coincidences with the true experimental test data, which proves the method is reasonable and dependable and the prediction results are effective and credible. In addition, the good simulation results show that the SLD parameters can reflect the pore structure characteristics and corresponding adsorption characteristics of the shale samples, which can be used for the quantitative characterization of shale pore system.     

伊利石和高岭石对U(Ⅵ)的吸附

以伊利石和高岭石为吸附剂，通过静态吸附法研究了其对U(Ⅵ)的吸附特性。考察了接触时间、初始浓度、吸附剂质量、pH、温度、离子种类、腐殖酸等对其吸附效果的影响；采用红外光谱(FTIR) 对伊利石和高岭石的结构进行了表征。研究结果表明：伊利石和高岭石对U(Ⅵ)具有很强的吸附能力，在10 h、铀初始质量浓度为30 mg/L、吸附剂质量为0.04 g、pH=5的条件下，伊利石对U(Ⅵ)的吸附效果最好；在12 h、铀初始质量浓度为30 mg/L、吸附剂质量为0.01 g、pH=5的条件下，高岭石对U(Ⅵ)的吸附效果最好；随着温度的升高，伊利石和高岭石对U(Ⅵ)的吸附能力不断增强，尤其是伊利石；溶液中Mg²⁺、CO^2-₃、HCO^-₃显著降低了伊利石和高岭石对U(Ⅵ)的吸附效果；随着腐殖酸浓度的增加，伊利石对U(Ⅵ)的吸附能力提高，高岭石对U(Ⅵ)的吸附能力降低。     

微生物质水热碳锰复合材料对铀的吸附行为研究

以工业啤酒酵母为碳源，采用一步法合成了微生物质水热碳锰复合材料（MHTC），并利用XRD、FT-IR和SEM等对材料进行了表征。在此基础上，系统研究了不同C/Mn原子比、初始pH值、接触时间、初始铀浓度对MHTC吸附铀性能的影响。结果表明：C/Mn原子比为1∶10的碳锰复合材料（MHTC-10）对铀的吸附性能最优。在铀初始浓度为50 mg/L、初始pH=4.5条件下，12 h可达吸附平衡，最大吸附量为371 mg/g。吸附过程符合准二级动力学模型以及Freundlich等温模型。热力学数据表明，铀在MHTC-10上的吸附是一自发、放热的过程。该研究结果可为含铀环境中铀的分离富集提供新的思路。     

恒湿文物展柜用吸附式空气取水方法

博物馆恒湿文物展柜的湿度控制至关重要，为实现展柜的自动恒湿功能，本文基于吸附式空气取水原理，提出了一种将环境水汽自动补充至恒湿文物展柜系统水箱的方法，并搭建了相应的小型空气取水装置，证明了该方法的可行性；同时，构建了传热传质耦合的空气取水装置数学模型，在获取环境温湿度对装置取水量的影响规律后，分析加热功率和吸附床结构对装置单位能耗取水量的影响；此外，为便于装置的后期推广应用，提出了两个基于吸附床高度和直径的量纲为1参数。结果表明：进口空气的温度对取水量影响较小，但进口空气的湿度对取水量影响较明显，取水量随着湿度增加而增加；加热功率存在最优值，单位能耗取水量随着加热功率先增大后减小；在当前几何参数组合下，两个量纲为1参数η=2、β=4时，装置的单位能耗取水量最高。     

城市污水厂剩余污泥对水中F-的吸附性能研究

利用城市污水处理厂的剩余污泥对水中F-进行吸附处理,通过污泥投加量、F-初始质量浓度、时间、pH等反应条件的研究,探讨除氟效果和影响因素。结果表明,室温下,污泥对F-的吸附在60 min后达到平衡;20 g/L的污泥投加量对10 mg/L含氟水的F-去除率可达83.1%;污泥可在3~10的较大pH范围内保持稳定的除氟效果。准二级动力学模型很好地拟合了污泥对F-的吸附行为,Langmuir和Freundlich模型均符合污泥对F-的吸附特性,热力学参数的计算表明该吸附过程是自发的放热反应。